Re-useable cover guards floor and wall openings and holes. Adjusts to fit any hole with diameter from 2" - 6". Not intended to be used in areas exposed to vehicular traffic or heavy machinery.
Phase of Construction |
Floor sheathing, wall installation, roof truss installation, window installation |
Manufacturer’s Device Page |
Hole Covers, Inc. |
Installation |
Insert pan head screws through top of cover into barrel of flag. Tighten screw until flag is tight against inside of floor opening. Covers should be checked daily before use and re-tightened if necessary. |
Manual |
Instruction Manual |
Vendor |
Hole Covers, Inc. |
Cost |
$2.95 plus shipping |