Provides permanent anchorage point for fall protection systems for 1 individual on wood rooftops. Stainless steel, 9-3/4 in. long with 1 D-ring
Phase of Construction |
Roof shingling, siding, HVAC, maintenance |
Manufacturer’s Device Page |
Guardian Fall Protection, Qualcraft |
Installation |
Installed perpendicular to the roof peak through sheathing and roof truss, butyl strip down, label up, and D-ring facing away from the peak. Galvanized nails hammered through anchor holes into existing structural member capable of supporting 5000 lbs load. Roof shingles are installed over the anchor according to manufacturer's directions. Warning: Users must strictly adhere to the manufacturer’s inspection, installation, maintenance and use directions; and must follow local, state and federal safety regulations. Structural member must be able to support 5000# force. Failure to do so could result in serious injury or death. |
Manual |
Instruction Manual |
Vendor |
Amazon, guardianfall.com, fallprotectionpros.com, geotechsupply.com, harnessland.com |
Cost |
$15-30 individually, Sold in cartons of 8 or 25 from manufacturer |
Video |
Video 1, Video 2 |