Plastic housing that attaches to the subfloor to create free-standing guardrails.
Phase of Construction |
Wall installation, roof sheathing, shingling, maintenance |
Manufacturer’s Device Page |
Safety Maker Inc. |
Installation |
Boots are installed less than 8' apart using four 3/8"x2" hex head lag screws in solid wood substrate, five 3/8"x2" hex head lag screws for I-floor, four 3/8"x3" hex head lag screw into plywood/OSB with additional blocking behind board, and four 3/8" masonry anchor for concrete. 1 1/2” fender washers are used on each screw. Warning: Users must strictly adhere to the manufacturer’s inspection, installation, maintenance and use directions; and must follow local, state and federal safety regulations. Failure to do so could result in serious injury or death. |
Manual |
Furnished with purchase |
Vendor |
Call for distributors and resellers in your area: 1-800-804-4741, safetyboot.com, amazon.com, applesafety.com, dhcsupplies.com, erniestools.com |
Cost |
$25-39 for 1, $100 for 4, $300 for 12 |