Two 24" tie off straps attached to bar that spans between two roof trusses to provide fall arrest anchorage for 2 individuals. Truss Spanner stays attached to the truss, but is unusable after house is finished.
|Phase of Construction|
|Roof sheathing, roof shingling, HVAC|
|Manufacturer’s Device Page|
|Installed over top chords of two trusses, steadied with 12d stainless steel nail, and fastened in place with 2 1/4" grade 8 bolts with lock nut. Structure must be able to support 5000# load. Warning: Users must strictly adhere to the manufacturer’s inspection, installation, maintenance and use directions; and must follow local, state and federal safety regulations. Structural member must be able to support 5000# force. Failure to do so could result in serious injury or death.|
|superanchor.com, bigrocksupply.com, ordexsupply.com|